8536SE01

The Square D 8536SE01 Fusible MCC is a versatile and reliable solution for managing and protecting electrical circuits. This 18-pole, 120V coil type Motor Control Center (MCC) combiner unit is designed to provide superior electrical performance, ease of installation, and enhanced safety features.

The heart of this MCC is its fusible interrupter system. Each of the 18 poles comes equipped with a fusible interrupter that is designed to clear short-circuit faults while minimizing the interruption to the electrical load. This system helps prevent damage to downstream equipment and ensures the continuous operation of critical circuits during fault conditions.

The Square D 8536SE01 is constructed with a rugged, all-steel enclosure that is both NEMA 1 and NEMA 12 rated. This means it is suitable for indoor and outdoor installations in environments that are subject to dust, water, or oil. It features a modular design, making it easy to assemble and install, while also allowing for future expansion.

The MCC also offers flexible bus connection options, including both solid and stranded bus bars, and a variety of termination methods, including screw terminals and plug-in connectors. This allows for customization based on the specific requirements of the application.

The Square D 8536SE01 is UL and CSA listed, ensuring compliance with the most stringent electrical safety standards. It also features a built-in ground fault detection system, providing enhanced protection against ground faults and ensuring the safety of personnel and equipment.

In summary, the Square D 8536SE01 Fusible MCC is an ideal choice for managing and protecting electrical circuits in a wide range of industrial applications. Its rugged design, reliable fusible interrupter system, and flexible bus connection options make it a versatile and cost-effective solution for ensuring the continuous operation of critical electrical systems.

Pros and Cons of Buying a Square D 8536SE01 Fusible MCC 18 Tall 120V Coil

The Square D 8536SE01 Fusible MCC 18 Tall 120V Coil is a type of motor control center (MCC) overload relay that provides protection against overheating and overloading of electrical motors. In this analysis, we will discuss the potential advantages and disadvantages of purchasing this product.

1. Overload Protection: The primary function of a fusible MCC is to protect motors from overheating and damage due to overloading. The Square D 8536SE01 can effectively prevent motor failure and downtime, ensuring continuous operation and productivity.

2. Easy Installation: This fusible MCC coil is designed for easy installation, saving time and reducing labor costs. It is compatible with various Square D MCC and motor starter models, making it a versatile choice for various applications.

3. Durable Construction: Square D is known for its high-quality products, and the 8536SE01 is no exception. The coil features a robust design with a high-temperature insulation system and a rugged housing that can withstand harsh industrial environments.

4. Cost-Effective: Compared to other overload protection solutions, such as circuit breakers or thermal overload relays, fusible MCCs are generally more cost-effective. They offer a higher current capacity and longer lifespan, making them an attractive option for industrial applications.

1. Limited Overload Capacity: Fusible MCCs are designed to protect against overloads up to a specific capacity. Once the protective element melts, the circuit is open, and the motor must be manually reset. This may lead to downtime and increased maintenance requirements.

2. Single-Use: Unlike circuit breakers, which can be reset multiple times, fusible MCCs are disposable. After the protective element melts, the entire coil must be replaced. This can result in additional costs and inconvenience.

3. Limited Flexibility: Fusible MCCs may not be suitable for applications where frequent or dynamic overload conditions are common. In such cases, circuit breakers or other overload protection solutions might be more appropriate.

The Square D 8536SE01 Fusible MCC 18 Tall 120V Coil offers several advantages, including overload protection, easy installation, durable construction, and cost-effectiveness. However, it also has some disadvantages, such as limited overload capacity, single-use, and limited flexibility.

Based on this analysis, the decision to purchase the Square D 8536SE01 depends on the specific requirements of your application. If your motors operate consistently under normal loads and infrequent overloads, the fusible MCC could be a cost-effective solution. However, for applications with frequent or dynamic overloading conditions, circuit breakers or other overload protection solutions might be more suitable.

To make an informed decision, assess your application's requirements and consider the advantages and disadvantages of the Square D 8536SE01 Fusible MCC 120V Coil. Consult with an electrical engineer or a qualified professional to determine the best overload protection solution for your specific use case.

Details:

Mcc263 kg, the Square model 4 fusible combo mcc bucket is a 18 tall, size 3 motor control cabinet designed for industrial automation and motion systems. 9070 g0-3 0.150 VA Capt, red pilot light, hora 3 position selector switch. 18 tall bucket, with door. This product is ideal for various motor control applications in a range of industries, offering reliable performance and durability.

It features a 120v coil voltage and is made in the USA by trusted brand Square. Emergency services after hours are available for a fee.

specifications indumotorol:

• brand: Square D
• mpn: 8536se01
• model: Model-4
• part type: Coil
• nema size: Size 3
• coil voltage: 120 V
• country of origin: United States

payments indumotorol:

• wallet: apple-pay
• other
• credit card: discover

offer indumotorol:

• best offers: true
• availability: in stock
• prices: $50.00–$5950.00
• item condition:
  • Used
  • Seller refurbished
  • New – Open box
  • For parts or not working
  • New
  • New with box and papers
• started: april 10, 2026
• in stock #: 5
• sold #: 8
• options: ship-to-home

general indumotorol:

• category: Business & Industrial > Starters > Drives > Motor Controls

seller indumotorol:

• rating: 100.0%
• city: exeter, new hampshire
• # reviews: 7067

returns indumotorol:

• time: 30 days
• policy: returns accepted
• paid by: buyer
• method: money back

shipping indumotorol:

• class: standard, expedited, one-day
• transit: 4-8 days
• carrier: ups, usps
• type: calculated
• service: ups ground, usps priority mail, ups 2nd day air, ups next day air

Similar Items:

• MODEL-6: AMP FEEDER, Square D
• M5DSMG050-16M: MOTOR CONTROL AMP, Square D
• M5DSMG015-13M: MOTOR CONTROL AMP, Square D
• 8903SMG3: AMP POLE LIGHTING CONTACTOR COIL, Square D
• MODEL-4: FEEDER AMP, Square D
• G-271415: , Square D
• FHL36080: AMP FEEDER, Square D
• 8736SC07S: COIL STARTER, Square D
• 8536-SCO3: AMP, Square D
• FHP70-FHP20: AMP FEEDER, Square D
• LHL36300: AMP FEEDER, Square D